V-Cut PCB Cutting Machine Groove Cutter Separator for PCB Boards, LED Light Boards 110V 40W

Attention1. Before using the machine, please read this manual carefully, and it will help you operate it smoothly.2. Do not remove the guard around the blade under any circumstance, in order not to cause any danger.3. The machine is only designed for circuit board with pre-scored V-cut, do not use in other purposes.4. When operating this machine, do not wear too loose clothes. Long hair should be tied up to prevent it from being entangled.Specifiction:Voltage: AC110V/60HzPower: 40 WThickness of Cutting Range: 0.6mm~1.6mmCutting Speed: 0-200mm/sHeight of Upper PCB: less-than-equal 20mmHeight of Lower PCB: less-than-equal 10mmInner Side of PCB Range: less-than-equal 240mmUpper Blade Adjust Range: 0-15mmOperating Temperature: 10-35 centigradeStorage Temperature: -20-50 centigradeMachine Size(L x W x H): 15.6*12.4*16.4 in.Operation Instruction1.Connect to the power supply and start the switch.2.Adjust the gap between the upper and lower blades.3.The upper and lower cutters must be in the same plane, and the error cannot exceed 0.1mm.4.Set the cutting travel and speed5.Step on the pedal switch, and try sometimes. In case of no abnormity, formal work can be started.Basic maintenance1.After the completion of the work, please turn off the power supply and remove scraps.2.Pay attention to the protection of upper and lower cutters.3.When the machine is out of work for a long time, please remove the upper and lower cutters and coat with oil to protect. Please wipe it before use.4.Pay attention to checking the fastening of all screws.Item Include(022324):PCB Cutting Machine.Power Wire.ManualHexagonal Wrench

• Limitations: The limit height for components above the PCB is 0.79in/20mm and the limit height for components under the PCB is 0.39in/10mm. With its inner side, the maximum width the machine can cut is up to 9.45in/240mm; for outer side, it is no limitation for dimension
• Precision V-Groove Guidance: Utilizes the V-notch as a guide during cutting for assured quality and high efficiency. Adjustable speed up to Vmax=7.87in/s(200mm/s) ensures precise control
• Micro-Adjustable Precision Rail: Features an adjustable range for the upper blade from 0 to 15mm, allowing micro-adjustments to accommodate various PCB thicknesses and ensure uniform cutting
• Superior Performance: Use machine to cut so that it minimizes the stress and prevents welding point crack. High accuracy and safety. It is easy to maintain
• Versatile Applications: Suitable for a wide range of industries including LED, SMT, mobile phones, electric toys, and more. This Machine is used to separate the V-CUT-notch circuit board like Aluminum base plate, LED light board, FR4 and so on, Here we just take PCB as an example